Skip to content
    Onze webshop is vanaf nu geopendNaar de webshop

    Blow-in insulation your home insulated in one day

    No weeks of renovation. With blow-in insulation we insulate your roof, floor or wall in a single working day. Cellulose or wood fibre, vapour-open and immediate results.

    Done in 1 day

    Start in the morning and enjoy an insulated home by evening. No weeks of waiting.

    Minimal disruption

    We drill or cut small openings to insulate and seal everything neatly. Some dust may be released, but major disruption is avoided.

    Save immediately

    From day 1 you notice the difference on your energy bill and in your comfort.

    How does insulating in one day work?

    Blow-in insulation is the fastest way to insulate your home. Through small openings we blow cellulose, wood fibre, cardboard or straw into the pitched or flat roof, ground floor, intermediate floors and stud walls. The material fills every corner and gap, insulates immediately and is fully vapour-open. At the end of the day we seal everything neatly. You only notice the result: a warmer, quieter and more comfortable home.

    Blow-in insulation in practice

    Two Isoleerbewust craftsmen fitting a Pro Clima Intello vapour-open membrane and frame
    Attic roof finished with airtight taped Intello Plus membrane
    Blow-in trailer with hoses running into the house
    Craftsman blowing cellulose into a ceiling through a small opening
    Blow-in opening in the membrane showing densely packed cellulose

    Blow-in insulation in 3 steps

    Every corner filled, seamless connection, no thermal bridges. This is how we insulate a roof, floor or stud wall in a single day.

    1. Climate membrane and frame
    1

    1. Climate membrane and frame

    We install a vapour-open climate membrane and a wooden frame against the roof, floor or wall. The membrane keeps moisture from settling in the insulation; the frame creates a strong cavity of the right depth and carries the finishing panels later on.

    2. Blow in the natural insulation
    2

    2. Blow in the natural insulation

    Cellulose, wood fibre or straw is fed into the blower outside and transported through a long hose. Under controlled pressure the fibres fill every corner, gap and irregular shape. We continuously monitor the material density so it stays exactly where it should.

    3. Seal and finish
    3

    3. Seal and finish

    We close the fill holes airtight, restore the membrane and finish the frame ready for plaster board or the original finish. Workspace clean, insulation invisible, comfort immediate.

    Blow-in projects on video

    See how we insulate real homes with natural blow-in insulation.

    Swipe for more videos

    Choose your approach

    Three levels, tailored to your situation and budget.

    One building part

    Roof, floor or wall

    Blow-in insulation with cellulose or wood fibre
    One building part fully insulated
    Clean completion the same day
    Vapour-open and moisture-regulating
    Plan your day
    Most chosen

    Two building parts

    Combine and save

    Two building parts on the same day
    Smart combination discount
    Maximum savings in minimum time
    One point of contact, one day
    Subsidy application included
    Plan your day

    Complete home

    Roof + wall + floor

    Entire home insulated in 1-2 days
    Full insulation plan upfront
    Maximum energy savings
    Subsidy application included
    Aftercare and warranty
    Plan your days

    Is Isoleerbewust right for you?

    We're a great match if you're looking for...

    Quick results without hassle
    Natural, vapour-open materials
    A home suitable for blow-in insulation
    Save energy without major renovation

    We're not the best choice if you...

    No existing cavity or hollow space to blow into
    Synthetic insulation desired

    What does insulating in one day cost?

    The price per m² depends on the total surface area. Applies to roof, floor and stud wall blow-in.

    30 – 50 m²

    € 50 – 70 /m²

    Small projects

    50 – 100 m²

    € 30 – 50 /m²

    Average home

    > 100 m²

    < € 30 /m²

    Request a quote

    Uitgevoerde projecten

    Inblazen cellulose isolatie nieuwbouwproject

    Inblazen cellulose isolatie nieuwbouwproject

    In dit prachtig ontworpen nieuwbouwpand door Joris Hoogstede in Sint-Oedenrode hebben we in 1 weekend het gehele dak en gevels ingeblazen met cellulose.

    Inblazen Arnoldus Rotterdamstraat en Luitblomstraat

    Inblazen Arnoldus Rotterdamstraat en Luitblomstraat

    We hebben hier in 1 dag 2 projecten ingeblazen met cellulose voor een zakelijke klant van ons. Hierbij hebben we de daken en gevels ingeblazen bij beide projecten.

    Alexander Gogelweg

    Alexander Gogelweg

    In dit penthouse in Den Haag hebben we de klimaatfolie en rachels geplaatst in het platte dak. En daarna ingeblazen met IQ3 cellulose.

    Inblazen Wolfhezestraat

    Inblazen Wolfhezestraat

    Timelapse van 50 m2 gevel/dak en 40 m2 vloer inblazen met houtvezelisolatie. Start 8:00, bezemschoon opgeleverd om 14:00.

    VVE Spoorsingel

    VVE Spoorsingel

    De zoldervloer van dit VVE-pand hebben we van bovenaf ingeblazen met cellulose isolatie.

    Your insulation in 4 steps

    1

    Free home scan

    We assess which building parts are suitable for blow-in insulation.

    2

    Plan your insulation day

    Choose a date that suits you. We plan everything.

    3

    Insulation day

    Our team arrives in the morning and insulates everything in one working day.

    4

    Clean completion

    All holes sealed, workspace clean, ready to enjoy.

    Frequently asked questions

    Is my home suitable for blow-in insulation?
    Most homes with a hollow floor or accessible roof are suitable. We assess this during the free home scan.
    How long does it take exactly?
    Insulating one building part takes on average 3-4 hours. Two building parts fit in one working day. A complete home can take 1-2 days.
    Is blow-in insulation as good as boards and batts?
    Yes, blow-in insulation fills every corner and gap and connects seamlessly. In many cases it insulates even better than boards and batts.
    Does the material settle over time?
    No, cellulose is blown in under pressure and sets firmly. At the correct density it stays in place.
    Can I get a subsidy?
    Yes, blow-in insulation falls under the ISDE scheme. We help with the application.

    A warmer home tomorrow?

    Plan your insulation day and quickly enjoy a more comfortable, energy-efficient home.

    Alice

    Cookies on Isoleerbewust.nl

    We use functional cookies to make the website work properly and analytical cookies to understand our traffic. We place no tracking or advertising cookies.

    Read our privacy policy for more information.